More results...

Low-Carbon Steel strip: Hot-rolled – Pickled

MECHANICAL PROPERTIES AND HARDNESS REQUIREMENTS
ReL N/mm²Max. Rm N/mm²Minimum elongation %Mechanical properties guaranteed 1)
Classification of symbolsNumerical classificationEuropean Standard (EN)L0 = 80 mmL0 = 5.65 √S0
1 ≤ e < 22 ≤ e ≤ 51.5 ≤ e < 22 ≤ e < 33 ≤ e ≤ 5
DD111.0332EN 10111170 – 360170 – 3404402324281 month
DD131.0335EN 10111170 – 330170 – 3104002829336 months
DD141.0389EN 10111170 – 310170 – 2903803132366 months

1) The guarantee and mechanical properties relate to the date on which the material was produced and in no case relate to the delivery date.

Minimum yield strength, ReH, in N/mm2Tensile strength, Rm, in N/mm²Minimum elongation in %
Nominal thickness, in mmNominal thickness, in millimetresL0 = 80 mm; Nominal thickness, in mmL0 = 5.65 √S0 Nominal thickness, in mm
Classification of symbolsNumerical classificationEuropean Standard (EN)≤ 5< 3≥ 3 ≤ 5≤ 1> 1
≤ 1.5		> 1.5
≤ 2		> 2
≤ 2.5		> 2.5
< 3		≥ 3
S235JR
S355JO		1.0038
1.0553		EN 10025
EN 10025		235
355		360 – 510
510 – 680		360 – 510
470 – 630		171819202126
151617181924
141516171822
121314151620
Classification of symbolsNumerical classificationEuropean Standard (EN)Chemical Composition
Max. CMax. SiMax. MnMax. PMax. SMax. NTiCuAlNb
DD111.0332EN 101110.12–0.6000.0450.045–––––
DD131.0335EN 101110.08–0.4000.0300.030–––––
DD141.0389EN 101110.08–0.3500.0250.025–––––
S235JR1.0038EN 100250.17–1.400.0350.0350.012–0,55––
S355JO1.0553EN 100250.200.551.600.0350.0350.012–0.55––

THICKNESS TOLERANCES

Nominal thicknessThickness tolerances according to EN 10051 for nominal widths of
>≤≤ 1200> 1200 ≤ 1500
–2,00± 0,13± 0,14
2,002,50± 0,14± 0,16
2,503,00± 0,15± 0,17
3,004,00± 0,17± 0,18
4,005,00± 0,18± 0,20
5,006,00± 0,20± 0,21

Sizes in mm.
Thickness tolerances for sheets/plates made of steel with a normal deformation resistance at elevated temperatures (category A).  

WIDTH TOLERANCES

Width tolerances for strips with sheared edges

Nominal thickness t Standard slitting tolerances for VINCO 1)Width tolerances according to EN 10051 for nominal widths of
3-1515-5050-150>150≤ 1200> 1200 ≤ 1500
>≤
–2,00on request± 0,13± 0,15± 0,16± 0,17± 0,19
2,002,50on request± 0,13± 0,15± 0,16± 0,18± 0,21
2,503,00on requeston request± 0,16± 0,175± 0,20± 0,22
3,004,00on requeston request± 0,16± 0,175± 0,22± 0,24
4,006,00on requeston request± 0,16± 0,175± 0,24± 0,26

Sizes in mm.
1) Other, closer dimensional tolerances on request.

EDGE CAMBER TOLERANCES

Nominal thickness t Standard slitting tolerances for VINCO 1)Width tolerances according to EN 10051 for nominal widths of
3-1515-5050-150>150≤ 1200> 1200 ≤ 1500
>≤
–2,00on request± 0,13± 0,15± 0,16± 0,17± 0,19
2,002,50on request± 0,13± 0,15± 0,16± 0,18± 0,21
2,503,00on requeston request± 0,16± 0,175± 0,20± 0,22
3,004,00on requeston request± 0,16± 0,175± 0,22± 0,24
4,006,00on requeston request± 0,16± 0,175± 0,24± 0,26

Sizes in mm.
Sag tolerances according to EN 10051 for pickled hot-rolled strips will be agreed when placing the order.

RIPPLE – LONGITUDINAL FLATNESS

The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm on 1000 mm. Any other flatness requirement must be agreed when placing the order.
  • The products covered by Standard EN 10111:1998 are suitable for surface coating.
  • The type of coating must be indicated when placing the order.
Classification of symbolsNumerical classificationEuropean Standard (EN)Old designationsApproximate international equivalents
US (AISI)Japan (JIS)China (GB)
DD111.0332EN 10111CS Type BA1011SPHD/ HR 1G313108GB/T 710
DD13
DD14
S235JR1.0037EN 10025St37-2
S355JO1.0553EN 10025St52-3U

HOT ROLLED NARROW STRIP: LOW CARBON STEEL

CHEMICAL COMPOSITION OF PICKLED STRIP

Since 1948 we have been working in the supply of strapping and we have been expanding the services we offer to meet the needs of our customers. We currently have three cutting and storage centers in Vizcaya, La Rioja and Barcelona to guarantee flexibility in the delivery of goods. Our customer orientation pushes us to continue working day by day to achieve excellence in our products.

VINCO offers you a wide variety of chemical compositions for hot rolled strip, made of high strength and low carbon structural steel:

  • DD11 – DD14 steel strip: this type of material has good weldability characteristics and high corrosion resistance in some cases, such as DD14 steel. All these types of strapping are governed under the EN 10111 Standard that applies to continuous hot rolled strip of low carbon steel for cold forming.
  • Steel strip S235JR: this is a non-alloy structural steel widely used in the construction industry. This strip is subject to Standard EN 10025, which refers to the technical conditions of supply of hot-rolled products made of non-alloy steel and intended for general-purpose metallic constructions.
  • S355JO steel strip: this variety of strip is composed of manganese steel with low tensile strength and high impact resistance. Like S235JR steel strip, it conforms to EN 10025 to ensure optimum technical delivery conditions.

FINISHES AND TOLERANCES FOR HOT ROLLED STRIPS

Finishes for hot rolled or pickled strip are subject to the EN 10111 standard that applies to this type of hot rolled products. In addition to the coatings that are already included in the Standard, VINCO provides a wide selection so that you can choose the one that best suits your needs: brass plating, copper plating, nickel plating, gold plating, electro-zinc plating, silver plating, pre-painted or lacquered and tin plating.

The tolerances section of the data sheet includes all measurements and dimensions in millimeters for thickness tolerances according to EN 10051; width tolerances for sheared edge strips; deflection tolerances under commercial agreement and flatness tolerances for strip strips.

  • Contact Us